Life on Mars? The Laser Zentrum Hannover is Searching

Europe is getting ready for its first unmanned visit to the surface of Mars. “On board” are the scientists of the Laser Zentrum Hannover e.V. (LZH). The group Space Technologies are currently developing a laser suitable for use in outer space for the so-called EXOMARS-MISSION. With the help of this laser, hopes are high that any form of life on the red planet can be found.

Prototype of the MOMA laser, developed at the LZH in cooperation with the von Hoerner & Sulger GmbH, the Max Planck Institute for Solar System Research (MPS) and supported by the German Aerospace Center (DLR).

The first European Mars Rover on a joint mission of the American and European space agencies NASA and ESA will take off in 2018. The 250 kg Rover will roll over the surface of Mars at a speed of 100 m per hour. While doing so, it will inspect the surface and gather up ground and rock samples, some of them up to 2 m deep. The main goals of the so-called EXOMARS mission are to search for traces of former or present life on the earthlike planet, and to prepare for the arrival of a manned Mars landing.

One of the central analytical instruments on the EXOMARS Rover is MOMA. MOMA stands for “Mars Organic Molecule Analyser” and will help with the complicated search for traces of life, by identifying organic materials and analysing it. If organic molecules like hydrocarbons are found, this might mean they might point to possible forms of life on Mars.

One of the core components in the MOMA is a laser desorption mass spectrometer (LD-MS) suited to travel in space, which includes a diode-pumped, solid-state laser in the UV spectrum. Using laser desorption, it is possible to bring non-vaporizable molecules in a gas phase, and make them slightly ionized, so they can be detected in a mass spectrometer. To achieve this, a compact, pulsed laser with a radiation wavelength of 266 nm is needed, with a laser pulse energy of more than 250 µJ. Such a laser system, which is also suitable for travel in space, is currently not available.

In order to use this decisive technology, the Space Technologies Group in the Laser Development Department of the LZH has received funding from the national program “exploration of outer space.” The current project aims at optimizing an existing laser system prototype, making it ready for the mission by 2014.

Around 3 million Euros will be going to the LZH for further development and qualification of the so-called Laser Desorption Mass Spectrometer (LD-MS), which is being constructed under the leadership of the Max Planck Institute for Solar System Research (MPS).

The core job of the LZH is to develop and construct the actual solid-state laser head. The technical requirements for use in outer space are very high. Dr. Jörg Neumann, project leader at the LZH explains, “The high temperature changes between night and day on Mars are a real problem. On top of that come the mechanical vibrations on the way to Mars and cosmic, ionising radiation. The real challenge is, that the laser must be rugged enough to withstand these elements, but at the same time light, small and compact.”

Scientists in the Laser Development Department are working on a passively Q-switched Nd:YAG oscillator, which is pumped longitudinally using optical fibers. With the help of non-linear crystals, the infrared light of the oscillator is transformed into ultraviolet light. Thermal controls guarantee that this system functions despite changing surrounding temperatures.

Dr. O. Roders is the project leader for the MOMA instrument at MPS in Katlenburg-Lindau in Lower Saxony, the partner working together with the LZH. He sees the cooperation with the Laser Zentrum as an excellent combination of know-how. “The absolute specialists for the necessary UV laser technology are working in Hannover,” he says. “Our experience is necessary for the suitable laser electronical parts that have to withstand the most harsh conditions in space.”

Several years of intensive development are still necessary before the group has completed a model suitable for use in space, but first investigation with a prototype are very promising: the laser head has already successfully withstood ionising radiation, vibrations and a thermal-vacuum test.

This project is subsidized by the German Aerospace Center (DLR) with funding from the Federal Ministry of Economics and Technology (BMWi), based on a resolution passed by the German Parliament under project number 50 QX 1002.

About the Author
Steven Glover is a proud member of the LIA staff. When he is not at work he is actively involved in several charitable efforts.
Posted in Uncategorized